How to Install Dishwashers

  • Wire the Dishwasher

    To access the wiring junction box, use a nut driver or screw driver to remove the two base plate screws on the front of the dishwasher. On the right side of the unit will be a metal junction box. Usually, you’ll need a nut driver to remove the cover bolt. Once removed, you’ll see a ½” hole where the wire will be installed using a Romex connector. Stick six inches of wire into the connector and tighten. Insert the wire into the hole and install the lock nut to hold the connector. Strip the wires and connect the black to black, white to white, and bare copper wire to the ground screw.

  • Leave a Reply